Cuvette compartment spacers and holders

CELLS, REFERENCE MATERIALS & OPTICS
FOR ALL YOUR SCIENTIFIC APPLICATIONS

Starna Cell Holders and Spacers

Cell holder short path Length
The cell holder Type CH/2049 is designed for use with Types 20 & 49 with path lengths of 3mm or less. Exterior dimensions are 12.5 x 12.5 x 52mm.
Type No.	Description
CH/2049	Cell holder, short path length

Cell holder, Long path length
Cell holders Type CH/50 and CH/100 are for rectangular cells up to 50 and 100mm path lengths respectively. The CH/34/100 will fit 50mm or 100mm Type 34. All are complete with a 75mm x 50mm back plate to fit standard infrared instrument holders.
Type No.	Description
CH/1/50 CH/1/100 CH/34/100	Up to 50mm cell holder Up to 100mm cell holder 50/100mm T34 holder

Cell compartment spacers
Aluminium spacers, black anodised, available in three sizes for use with 1, 2, and 5mm path length cells, supporting them in a normal 12.5 x 12.5mm holder where there is no cell holder path length adjustment facility.
Type No.	Description
SPA/1 SPA/2 SPA/5	for 1mm path length cells for 2mm path length cells for 5mm path length cells

Magnetic stir bars
PTFE coated magnetic stir bars, available in packs of ten to fit the MS (magnetic stirring) . Types 18/MS and 28/MS need the MSB/6x1.5 to allow the stirring bar to enter the narrow sample compartment.
Type No.	Dimensions
MSB/6x1.5/10 MSB/6x3/10	6mm long x 1.5mm diameter 6mm long x 3mm diameter

Quartz block inserts
Precision polished FarUV quartz inserts are intended for use with Standard Rectangular 10mm path length cells, when a reduced path length is required without using a different cell. Four different size combinations, each provide two different path lengths as indicated, by rotating the insert through ninety degrees.

Home Cells Reference materials Optics Faq's and Technical Information